SERVICES

Safety is our top priority at Watt Now Electric. Every task—from a simple lighting upgrade to the engineered installation of full-scale electrical systems—is performed under strict ESA inspection to ensure compliance and peace of mind. Serving residential, commercial, and industrial clients across the GTA, we blend expert craftsmanship with meticulous attention to detail to deliver solutions that are reliable today and built to last.

RESIDENTIAL

Custom Home

Building your custom home demands more than basic wiring—it requires a partnership built on technical expertise and creative collaboration.

Translate Vision into Plans: We work side-by-side with architects and builders to map smart-home technology, accent lighting, and specialty circuits that reflect your lifestyle.
Apply Precision Craftsmanship: From concealed LED coves to dedicated theater-room feeds, our team uses CSA approved components and best-practice terminations for lasting performance.
Deliver White-Glove Service: Pre-handover walkthroughs, personalized operating guides, and scheduled maintenance check-ins mean your bespoke system never misses a beat.

New House

We turn blueprints into living spaces that are safe, smart, and built to last. Serving the GTA, our end-to-end new construction electrical services mean you get a single point of accountability—from initial design review through final inspection.

Our Focus:

Code-Driven Design: Every project begins with a thorough review of architectural and engineering plans to ensure full compliance with Ontario’s electrical code and local bylaws.
Seamless Coordination: We integrate lighting, power, data, security, and renewable systems in parallel with other trades, keeping schedules tight and change-orders minimal.
Future-Ready Infrastructure: By sizing panels, and wiring with anticipated load growth in mind (EV chargers, additional living spaces, hot tubes), we safeguard your home’s adaptability.

Renovation

Renovating an existing structure brings hidden challenges—outdated wiring, unexpected obstructions, and strict timelines. Watt Now Electric stands out by:

Comprehensive Site Assessment: Before demo begins, we perform a non-destructive inspection to locate buried feeds, ensure grounding integrity, and anticipate coordination with plumbing and framing.
Refined Safety Protocols: With live-system lockout/tagout procedures, GFCI/AFCI retrofits, and dust-containment barriers, we protect both your home and our crews.
Innovative Upgrades: We layer in energy-saving LED fixtures, intuitive control panels, and a smart-home system to modernize your space while preserving its character.

Panel Upgrade

Upgrading your electrical panel is a critical step in ensuring a home’s safety, capacity, and future readiness. We excels by focusing on three key areas:

Thorough Load Assessment & Planning

We evaluate your existing panel and forecast your household’s evolving needs—EV charging, additional circuits, or smart-home expansions—to size and configure the new panel precisely.
Code-Compliant Installation

Using CSA approved panels, breakers, and surge protection, we swap out your old unit with modern grounding and overcurrent safeguards, following our ESA inspection checklist at every phase.
Comprehensive Testing & Handover

After installation, we perform voltage and load tests to confirm optimal operation, then deliver a concise maintenance guide and system overview so you can enjoy reliable, safe power for years to come.

upgrsde-electrical-service-737x491.jpg.webp

COMMERCIAL

New Construction

Building a new commercial space demands flawless execution from the ground up. We leads with:

Integrated Design Collaboration

We partner early with architects and general contractors to align electrical layouts, lighting schemes, and low-voltage systems—streamlining coordination and reducing costly revisions.
Code-Driven Quality Control

Our team enforces strict adherence to Ontario’s electrical standards, using detailed checklists and pre-scheduled ESA inspections to guarantee every conduit, panel, and fixture meets or exceeds requirements.
Future-Proof Infrastructure

Anticipating growth, we size feeders, panels, and data pathways for tomorrow’s demands—whether you’re planning tenant expansion, high-density computing, or EV fleet charging.

Office

Modern offices need flexible power solutions that adapt to evolving workstyle. We excels in:

Scalable Power Distribution
From modular floor boxes to under-floor busways, we design systems that can quickly reconfigure as teams grow or spaces are reimagined.
Smart Lighting & Controls
We install networked fixtures, occupancy sensors, and daylight harvesting controls to optimize energy use and enhance occupant comfort.
Redundancy & Reliability
By incorporating backup feeds, UPS integration, and surge protection, we ensure your critical systems stay online—supporting productivity without interruption.

Retail

In retail environments, aesthetics and uptime drive customer satisfaction. We delivers:

Accent & Display Lighting
We craft layered lighting plans—from feature spotlights to ambient backlighting—that showcase merchandise and create inviting atmospheres.
Robust Point-of-Sale Wiring
Our precision wiring for POS terminals, digital signage, and networked kiosks minimizes downtime and supports seamless transactions.
Energy Management Solutions
Through advanced controls and LED retrofits, we help retailers reduce operating costs and meet sustainability goals without compromising visual impact.

Service Upgrade

Upgrading an existing commercial service requires speed and accuracy to avoid downtime. We distinguishes itself by:

Detailed Load Analysis
We conduct a comprehensive assessment of your current service, forecasting peak demands and future expansions to specify the optimal panel, transformer, and protection gear.
Rapid, Code-Compliant Execution
Our licensed crews perform service changes under utility coordination, following ESA-approved protocols to swap meters, panels, and feeders with minimal disruption.
Validation & Documentation
Post-upgrade, we perform load tests and grounding checks, then supply clear reports and maintenance recommendations—ensuring your business enjoys reliable power and full code compliance.

INDUSTRIAL

New Construction

Building new industrial facilities demands precision, coordination, and code compliance. We leads the way by:

Integrated Design & Planning

We partner with your engineering and project teams from day one—reviewing P&IDs, single-line diagrams, and vendor specs—to craft power distribution, lighting, and control schematics that fit your production flow.
Turnkey Installation

From switchgear and MCCs to conduit runs and cable trays, our licensed electricians execute every phase under strict ESA protocols, ensuring seamless energization on schedule.
Quality Assurance & Commissioning

After installation, we perform infrared thermography, insulation resistance tests, and meggering to validate every connection. Detailed commissioning reports guarantee your new system meets performance and safety targets.

Lighting Control

Optimized lighting control reduces energy use, lowers maintenance, and enhances workplace safety. We delivers advanced solutions by:

Custom Control Strategy

We analyze your facility’s occupancy patterns, task lighting needs, and emergency egress requirements to design networked lighting schemes that balance visibility with efficiency.
Smart Integration

Our team programs scene presets, daylight harvesting, and motion zones—integrating lighting controls into your BMS or PLC for centralized monitoring and automated demand response.
Ongoing Support & Upgrades

Beyond initial setup, we offer lighting upgrades, sensor recalibrations, and retrofit paths so your lighting network stays current with evolving regulations and production changes.

Upgrade Existing Facility

Retrofitting an operational plant carries unique challenges: downtime must be minimized and safety maximized. We excels through:

Pre-Work Assessment & Phasing

We conduct a live‐site audit—identifying legacy cabling, load centers, and critical circuits—then develop phased work plans that keep your production lines moving.
Safe Execution Protocols

Using detailed lockout/tagout procedures, GFCI/AFCI retrofits, and portable enclosures, we isolate work areas to protect employees and equipment during service changes.
Performance Verification

After upgrades—whether replacing sub-feed breakers or adding surge protections—we complete load studies and power‐quality analyses, providing clear reports to document improved capacity and reliability.

MAINTENANCE

Preventive

Routine tasks aimed at detecting and resolving minor issues before they escalate:

Visual Inspection: Examine panels, conduits, and devices for signs of wear, corrosion, or loose connections.
Circuit Breaker Testing: Inspect and test breakers for proper trip operation, ensuring overload protection remains effective.
Outlet and Switch Testing: Verify correct wiring, grounding, and polarity at receptacles and switches to prevent shocks and malfunctions.
Cleaning & Tightening: Remove dust from components and tighten terminal connections to maintain conductivity and prevent overheating.
Grounding System Checks: Test grounding electrodes and bonding conductors to confirm a low-impedance path for fault currents.

Predictive

Advanced diagnostics that forecast failures before they occur:

Infrared Thermography: Scan switchgear, transformers, and cable terminations to identify hot spots indicative of loose connections or overloads.
Vibration Analysis: Monitor motor and pump bearings for imbalance or misalignment that can lead to mechanical and electrical faults.
Power-Quality Analysis: Record voltage, harmonics, and surge events to pinpoint issues affecting sensitive equipment and plan corrective actions.
Insulation Resistance Testing: Measure insulation integrity in cables and motors to detect deteriorating dielectric material before breakdown.

Corrective

Repairs and replacements following the identification of defects

Fault Diagnosis: Use multimeters, ammeters, and oscilloscopes to locate short circuits, ground faults, and open circuits.
Component Replacement: Swap out damaged breakers, fuses, contactors, and wiring sections to restore full system functionality.
Control Panel Servicing: Repair or upgrade control and instrumentation panels to maintain production line reliability.
Surge Protection Installation: Replace or install surge protection devices (SPDs) to safeguard against transient overvoltages.

Emergency

Immediate response services for unplanned outages and safety hazards:

Power-Outage Restoration: Coordinate with utilities to safely re-energize facilities after outages, minimizing operational disruptions.
Temporary Power Solutions: Deploy generators or mobile power units to maintain critical functions during panel or service upgrades.
Hazard Mitigation: Perform rapid repairs on exposed conductors, arcing equipment, and damaged enclosures to eliminate immediate dangers.
24/7 On-Call Service: Offer round-the-clock availability for urgent electrical failures, ensuring help is always at hand.

GREEN ENERGY

EV Charger

EV chargers are categorized into three main levels based on voltage, current, and power delivery. Level 1 uses a standard 120 V outlet and is ideal for overnight home charging. Level 2 operates at 208 – 240 V and serves both residential (faster home charging) and light commercial (apartments, workplaces) needs. Level 3 (DC Fast Charging) bypasses onboard converters to deliver 50 – 350 kW via 400 – 800 V DC, making it suitable for high-turnover commercial and public charging stations.

Level 3 Charger

Voltage & Power: Delivers 400–800 V DC at 50–350 kW—peak rates add 100–250 miles in 20–45 minutes.
Use Case: Installed in commercial corridors, highway rest stops, and high-traffic public lots; not suitable for typical home electrical systems.
Technical Requirements: Needs heavy-duty transformers, cooling, and specialized metering; installation involves utility coordination and site reinforcement.

GENERATOR

Residential Backup Power

Site Evaluation & Sizing
Assess your home’s service capacity and critical loads to recommend the right generator size—ensuring seamless backup for essentials like HVAC, lighting, and kitchen circuits.
Automatic Transfer Switch (ATS) Installation
Install and wire a code-compliant ATS that senses utility loss and engages your generator instantly—no manual intervention required.
Standby Generator Setup
Hard-wire a natural gas or propane standby unit into your main panel, complete with grounding, surge protection, and CSA-approved clearances for safe, permanent operation.
Commissioning & Maintenance
Perform full system testing—transfer operation, load transfer, and fuel system checks—then schedule annual service visits to keep your backup power ready whenever you need it.

Construction Temporary Power

Load Study & Generator Selection
Analyze the site’s total demand—including temporary offices, lighting towers, HVAC, and tools—to determine whether a 208 V single-phase, 208/120 V three-phase, or 600 V distribution setup is required.
Temporary Service Pole & Distribution
Erect code-compliant power poles with weatherproof panels, breakers, and lugs; distribute power via feeder cables and cam-lock outlets to trailers, cranes, welders, and lighting.
Transfer & Metering Coordination
Install manual or automatic transfer switches for quick grid-to-generator switchover, and integrate temporary metering per utility and ESA requirements.

We’re more than just your electrical contractor—we’re your dedicated partner in building safe, efficient, and future-ready spaces. Let’s connect soon to discuss how we can bring your next project to life and forge a lasting, trust-based relationship. We look forward to meeting you!

SERVICES

RESIDENTIAL

Custom Home

New House

Renovation

Panel Upgrade

COMMERCIAL

New Construction

Office

Retail

Service Upgrade

INDUSTRIAL

New Construction

Lighting Control

Upgrade Existing Facility

MAINTENANCE

Preventive

Predictive

Corrective

Emergency

GREEN ENERGY

EV Charger

Level 1 Charger

Level 2 Charger

Level 3 Charger

GENERATOR

Residential Backup Power

Construction Temporary Power

Thank you for exploring our services.

Get a Price Quote

CONTACT

WORKING HOURS